 |
Dust collector cleaning systems controller |
 |
|
|
|
| |
TBMM Sequential Timing Series |
|
 |
In reverse jet pulse cleaning systems of dust collector application, the TBMM sequential timers is developed exclusively to control the pulsing of diaphragm valves.
• Electrical pulse times
Electrical on time: 35-350ms
Electrical off time: 5-180s
• Number of valves: 1-50(max) in
single valve increments |
|
|
|
|
| |
Precision P1 - Continuous Control |
|
 |
The Continuous Control interface
provides simple and dependable
reverse pulse cleaning control on
a time interval basis. Electrical
actuation times range from 30 to
500ms and the between pulse pause
time ranges from 1 to 999 seconds. |
|
|
|
|
| |
616 Diferential Pressure Transmitter |
|
 |
| Very compact and low-cost diferential pressure transmitter, for the dust collector requires to be operated in automatic mode. |
|
|
|
|
| |
A2000 Differential Pressure Gage |
|
 |
| Differential pressure gage, for measuring pressure drop in dust collectors. |
|
|
|
|
| |
Precision P2 - Enhanced Demand Control |
|
 |
The Enhanced Demand Control
Interface provides sophisticated
on-demand filter cleaning functions.
The cleaning cycle is regulated by the
differential pressure across the filters
on the basis of high and low
differentialpressure limits, or on the
basis of a trigger value and a %
pressure drop desired. |
|
|
|
|
| |
A3000 Differential Pressure Switch/Gage |
|
 |
Differential pressure gage combined with switch function, for measuring pressure drop in dust collectors. Switching set points are instantly adjusted with front knobs. |
|
|
|
|
| |
Differential Pressure Control Panel |
|
 |
Cleaning system controller, which designed to satisfy the requirement for reliable 'demand' cleaning. The unit has two major components: Differential pressure gage with adjustable high and low set points; and Integral solid state relay electronics, a programmable, microprocessor based timer card. |
|
|
|
|
|
